Buildings

Oregon Department of Geology and Mineral Industries 2026 Buildings vector digital data Oregon Department of Geology and Mineral Industries Open-File Report O-26-03 Portland, Oregon, USA Oregon Department of Geology and Mineral Industries https://www.oregon.gov/dogami/pages/default.aspx Oregon Department of Geology and Mineral Industries 2026 Multi-Hazard Risk Assessment for Crook County, Oregon 1.0 Oregon Department of Geology and Mineral Industries Open-File Report O-26-03 Portland, Oregon, USA Oregon Department of Geology and Mineral Industries https://www.oregon.gov/dogami/pages/default.aspx The Oregon Department of Geology and Mineral Industries (DOGAMI) performed a multi-hazard risk assessment analyzing the consequences to buildings and resident population in Crook County. This feature class represents building footprints, depicting building shape and location. These building footprints where used to create the user defined facility (UDF) points required for the multi-hazard risk assessment. See the text from the report for technical information on methods and a discussion of results and interpretation. The purpose of this project is to provide communities with detailed risk assessment information to enable them to understand and compare hazards and act to reduce their risk. The risk assessment results quantify the consequences of natural hazards to each community and support the decision-making process in planning for disaster. 2026 Complete None Planned -121.110098 -119.649676 44.561847 43.720552 Oregon Geospatial Enterprise Office Metadata Keyword Thesaurus United States North America Oregon Harney None REPORT DATA: This product is for informational purposes and may not have been prepared for or be suitable for legal, engineering, or surveying purposes. Users of this information should review or consult the primary data and information sources to ascertain the usability of the information. This publication cannot substitute for site-specific investigations by qualified practitioners. Site-specific data may give results that differ from the results shown in the publication. See the accompanying text report for more details on the limitations of the methods and data used to prepare this publication. Oregon Department of Geology and Mineral Industries mailing and physical address

800 NE Oregon Street Suite 965

Portland Oregon 97232 USA 1 971 673 1555 1 971 673 1562 dogami-info@dogami.oregon.gov When contacting DOGAMI about this data set, please reference the data set title or other identifying information in your correspondence. DOGAMI publications can be downloaded from https://www.oregon.gov/dogami/pages/default.aspx Matt Williams Oregon Department of Geology and Mineral Industries The Crook County Multi-Hazard Risk Assessment was funded by a grant through the Cooperating Technical Partner grant program with the Federal Emergency Management Program. Unclassified This assessment only used building footprints greater than 100 square feet. The accuracy of building designation of footprints is considered high. This included parking garages, as they are designated as buildings by FEMA Hazus convention. The accuracy of non-building designation of footprints is considered fair to good. Carports were marked as non-building structures, although identification was not systematic. As a result, many carports are likely identified as a building. Building footprint outline ideally designates a single building. Add-ons to a building are often difficult to distinguish, and generally associated with the same building. We ran a topology check and fixed all overlapping polygons. This layer covers Harney County, Oregon. Building footprints capture a dynamic environment at a point in time. Some buildings present in the database may no longer exist due to fire or teardown. Newer construction, post-2018, may not be present, due to time frame in which we developed the database, and the imagery (orthoimagery and street-level) available for this project. Building footprint outline ideally designates a single building. Where encountered, large building complexes were divided up into distinct entities, though the process is limited to orthoimagery and occasional oblique imagery. Add-ons to a building are often difficult to distinguish, and generally associated with the same building. This layer was created at a scale of 1:2,000. This is Not Applicable. Building footprint data was derived from the existing DOGAMI publication, Statewide Building Footprints for Oregon, release 1.0. Refer to this report for detailed process information. This layer was generated using Esri ArcPro 3.3 software. Oregon Department of Geology and Mineral Industries mailing and physical address

800 NE Oregon Street Suite 965